λ = 0.000056
R = 8.93 m2 x K/W
0.5 mm layer
Thermo-reflective inner lining. Water-based dispersion for walls and ceilings, protects buildings internally with significant improvement of the thermal insulation properties of a heated room.
Creates a very flexible coating that corrects small cracks or microcracks on the surface of the wall and ceiling also preventing from new ones to form, further enhancing the aesthetic value.
Wraps up evenly, protecting against mold, bacteria and fungi.
Interior walls and ceilings in residential buildings, where heating in the fall / winter months or air conditioning in the summer can cause excessive spending.
Warehouses with large surfaces, reduces heat loss where very high walls make heating difficult. It also allows you to maintain an optimal temperature in the warm months, in which due to the specificity of these interiors, very high
temperatures often prevail.
λ = 0.000049
R = 10.20 m2 x K/W
0.5 mm layer
Thermo-insulating and heat-reflective coating for facades. Ready-to-use water- based coating, intended for external application of the building on almost any material.
Creates a very flexible coating that corrects small microcracks and prevents from new ones to appear.
Improves the energy balance of the building and decorate the facade.
Facades of residential buildings: single-family homes and apartment blocks. Facades of public services buildings. Any external facade.
λ = 0.000056
R = 8.93 m2 x K/W
0.5 mm - 1 mm layer
Thermal reflective coating for ceilings. Water-based, easy-dispersible coating designed for protection applied to almost all roofing materials.
It is a matte coating that can be colored. The structure allows it to be extremely pleasant from the point of view of aesthetic finish. Creates a very flexible coating that corrects minor microcracks and does not allow new ones to form.
It greatly reduces the temperature of the ceiling surface, thanks to the presence of microspheres that trap light. It also improves the heat balance of the building, reflecting the radiation from the insulated surface.
λ = 0.000138
R = 14.5 m2 x K/W
1 mm layer
Thermal insulating, reflective, elastomeric, acrylic and polymeric mass. Ecological coating, prepared and intended for use on surfaces that reach temperatures of up to 320 °C.
BAUTER THERMAL MASS 320 provides a radical reduction in heat emission, in elements that cannot be thermally insulated with traditional methods. It reduces the outside temperature of the pipe by 100 – 150 ° C, taking into account a suggested layer of thermal insulation mass with a thickness of approximately 10 mm, superimposed on a surface with very high temperature, for example in conductive hot steam pipes.
λ = 0.000056
0.5 mm layer
The only ecological thermal insulating coating with thermo-reflective properties of the world, intended for the insulation of historic buildings and surfaces where it is necessary to maintain the original appearance.
The preservation and protection of monuments or objects of great cultural importance have recently attracted much interest among scientists. There is a growing interest in the development of new materials for use in protective fields.
Heat reflective (up to 95 %), highly flexible (300 %) and vapor permeable (keeps surfaces free of moisture). Ensures maintenance and protection of materials against degradation.
Protection of facades of buildings and architectural monuments where other thermal insulation solutions (polystyrene, mineral wool) do not meet the criteria that maintain the historical values of urban planning (tenement houses, religious buildings and historic buildings and others).
λ = 0.000049 - 56
0.5 mm layer
Protective coating designed to protect wood structures against rain, mildew or other external factors.
Wooden facades, terraces, log walls, saunas, yacht decks, wooden shingles…
Model name: MARTIAN 01
Max. Operating pressure in bar: 220 bar
Max tip size: 1 gun .019 ''
Max. Capacity in l/min: 4
Frame structure: Steel
Pressure tank: 40 l
Hose: 1/4" x 15
Pistol
Type of gun: 4 fingers
Nozzle: 515 HEA or 515 FFLP
Gun filter: 60 mesh
Weight: 85 kg
Dimensions: 125/75/55
BAUTER adapts to the customer's needs. These types of solutions are designed individually, after understanding the your industry and needs. When ordering a product created just for you, can be sure that it will contain the parameters you need exactly.
